Additional air springs - 2-circuit basic set Fiat Ducato250 /Boxer /Jumper from
Effectively relieves the rear of the vehicle - reduces the tendency to roll
- 2-circuit system with double bellows for the rear axle
- new in our assortment
- best also order now: Art. no. 46563 Monitoring of operating pressure
- the additional air suspension at 2 manometers
- As an alternative to the pressure kit, you can also use our compressor kit, the self-sufficient
- Order complete accessory package (Art.No.465632):
- With the self-sufficient complete accessory package, you can even increase the ride height during
- and regulate the air pressure in the spring system at 2 pressure gauges.
- keep tabs on sb./sth.
- 2-circuit system with double bellows for the rear axle
- new in our assortment
- best also order now: Art. no. 46563 Monitoring of operating pressure
- the additional air suspension at 2 manometers
- As an alternative to the pressure kit, you can also use our compressor kit, the
- Order complete accessory package (Art.No.465632):
- With the self-sufficient complete accessory package, you can even increase the r
- and regulate the air pressure in the spring system at 2 pressure gauges.
- keep tabs on sb./sth.
647.00€
Prices incl. VAT plus shipping costs
3 immediately available
3 immediately available
- Art.no.: 46561
In vehicles with leaf suspension, an air bellows is mounted between the frame and the rear axle... mehr
In vehicles with leaf suspension, an air bellows is mounted between the frame and the rear axle to support the existing leaf springs. The VB-SemiAir is supplied as a two-chamber system, so the air bellows are not connected to each other. 2circuit systems ensure that small charging differences can be compensated for separately on the left and right. The VB-SemiAir is supplied with a drain/fill valve for this purpose. Explanation Single/two-circuit system: Single-circuit system : Both bellows are connected to each other. They are filled via a common line. With the 1-circuit system, only one manometer is required to monitor the entire air pressure in the system. A single-circuit system is only suitable if the wheel loads on the rear axle are identical on both sides and the load on the vehicle is completely uniform. Dual-circuit system: The air bellows on the left and right are both separate and can therefore be filled with different pressures. 2 manometers are required to monitor the pressure. Due to the possibility of varying the pressure separately, load-dependent wheel load differences can easily be compensated for in 2-circuit systems. Inclinations can be compensated.
Weiterführende Links zu "Additional air springs - 2-circuit basic set Fiat Ducato250 /Boxer /Jumper from"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Additional air springs - 2-circuit basic set Fiat Ducato250 /Boxer /Jumper from"
Bewertung schreiben
1
E5191: Pressure gauge for additional air spring
Pressure gauge for additional air spring
Pressure gauge for additional air spring
51.10€
1
E5192: T-piece for additional air spring
T-piece for additional air spring
T-piece for additional air spring
12.00€
VB-Airsuspension B.V.
Frankenweg 3
7051HV Varsseveld
NL
info@vbairsuspension.com
https://www.vbairsuspension.com/de/
VB-SemiAir 2-circle auxiliary air spring comfort set Fiat Ducato 250
46712
1,260.00€
immediately available
Ready for immediate shipment